Most viewed

2 Jul 2011

Remote control for toy car


Remote ContRol foR toy CaR

RECEIVER CIRCUIT  
     Remote ContRol foR toy CaR s.c. dwivedi Make any battery-operated toy car remote-controlled using  this circuit. The circuit, consisting of an infrared transmitter-receiver pair, uses IR beam transmission  to switch the toy car ‘on’ or ‘off.’ To  operate the toy car, you need to holdthe transmitter in your hand, keeping  it pointed at the toy car which has the  receiver fitted inside, and simply press  a switch provided on the transmitter. The transmitter works off 9V DC while the receiver needs 6V DC.  while the receiver needs 6V DC.  Fig. 1 shows the transmitter circuit.  It is built around two BC558 transistors  (T1 and T2), three BC548 transistors  (T3, T4 and T5), IR LED1 and a few  discrete components.  Fig. 2 shows the receiver circuit.  It is built around IR receiver module  TSOP1738, two BC548 transistors (T6  and T7) and a few discrete components.  In the transmitter circuit, there are  two astable multivibrators. The first, built around transistors T1 and T2, produces a frequency of about 1.2 kHz.  The second, built around transistors  T3 and T4, produces about 38 kHz. IR  LED1 is used to transmit the 38kHz  frequency.  In the receiver circuit, TSOP1738 receives the IR signal transmitted by  IR LED1 of the transmitter circuit. The  output of TSOP1738 is fed to transistorT6 via diode D1. The amplified signal  is further given to relay-driver transistor T7. Relay RL1 energises to control  the toy car. Working of the circuit is simple.  Initially, when no IR beam is falling on sensor TSOP1738, the relay  remains de-energised and the toy  c a r   d o e s n ’ t   m o v e .   W h e n   s w i t c h S1 is pressed, the IR beam falls on  TSOP1738 and its output goes low.  Transistor T6 cuts off and transistor T7 conducts to energise relay RL1 and  move the toy car.  Assemble both the circuits on separate PCBs. Enclose the transmitter PCB  in a suitable cabinet, with IR LED1  affixed on the front side and switch S1  on the top of the cabinet. Keep the 9V  battery inside the cabinet.  Enclose the receiver PCB inside  the toy car, with TSOP1738 fitted such  that the transmitted IR beam directly  falls on it. Fix switch S2 on the body of the car and the relay inside the car.  Use a 6V battery to operate the toy car receiver unit.
TRANSMITTER CIRCUIT


Flashing LED Project

Flashing LED Project

LED stands for Light Emitting Diode
A kit for this project is available from RSH Electronics.
Download PDF version of this page
This project is designed as an introduction to soldering, identifying common components, using the resistor colour code and placing components correctly on stripboard. The LED flashes at about 3Hz (3 flashes per second). This project uses a 555 astable circuit.

Parts Required

  • resistors: 470, 1k, 220k
  • capacitor: 1µF 16V radial
  • red LED (or orange, yellow or green if you prefer!)
  • 555 timer IC
  • 8-pin IC holder (a 'DIL socket') for the 555 IC
  • battery clip for 9V PP3
  • stripboard: 6 rows × 21 holes

Instructions

  1. Solder the 8-pin IC holder in the correct place on the stripboard.
  2. Break the 4 tracks under the IC holder with a track cutter tool. You can allow extra holes if your piece of stripboard is large enough.

    Stripboard with IC holder


  3. Use the resistor colour code to identify the resistors which are marked with coloured bands to show their value.
  4. Insert and solder the resistors in the correct position, they can be put in either way round, but you must line them up correctly with the IC holder.
  5. Identify the other parts, then solder them in the correct position and the right way round. To help you identify the parts please see our page on soldering.

    Stripboard layout for flashing LED


  6. Solder the 2 wire links in place around the IC holder, it is easier to use plastic-coated single-core wire. (The flexibility of stranded wire is not needed for connections like this and the strands can be difficult to push through the small hole).
  7. Finally insert the 555 timer IC and connect a battery!

1 Jul 2011

25,000 drivers for Windows


25,000 drivers for Windows


No more need to spend hours on-line browsing for drivers .
Just pop the Universal Driver CD in
and Windows will automatically search the comprehensive drivers.
This CD, (Iso format) contains software drivers for over
25,000 hardware components
from brands such as Dell, HP, Compaq, IBM, Sony, Toshiba, Panasonic,
as well as hardware component manufacturers Intel,
3Com, VIA, nVidia, ATI, SoundMax, and many more... 




Free Download Here
http://rapidshare.com/files/89845929/U_D_by_Skenderbej.part1.rar
http://rapidshare.com/files/89845919/U_D_by_Skenderbej.part2.rar
http://rapidshare.com/files/89845885/U_D_by_Skenderbej.part3.rar
http://rapidshare.com/files/89845655/U_D_by_Skenderbej.part4.rar

pass : http://yobookku.blogspot.com

ATI Catalyst 8.2


FaceFilter Studio v.2.0 Portable


FaceFilter Studio v.2.0 Portable | 10.57 MB
Everyone takes sometimes poor photos, now... rather than throwing them away you can restore them using FaceFilter Studio. Youcan adjust everything from color balance to skin tone. You can even change the expressions of people in the photo (something awesome).
FaceFilter Studio's proprietary 3D muscle-based photo morphing technology lets you fine-tune facial expressions naturally such as adding a smile, widening eyes or raising an eyebrow.


:: Remove bad expressions
:: Change facial expression
:: Open and widen eyes
:: Adjust head proportion & width
:: Slim/Fatten face
:: Revamp & Beautify faces
:: Improve balance
:: Enhance the skins appearance with subtle color adjustment to improve skin color, add a suntan or whiten.
:: Improve skin's complexion and smooth the texture by reducing wrinkles, lines or rough skin.
:: and more...


Free Download Here


pass : http://yobookku.blogspot.com

Windows TinyVista Rev01 Vista Ultimate Feb 2008


Windows TinyVista Rev01 Vista Ultimate Feb 2008

To use this CD, simply burn the ISO file (as an image, not as data) with Nero or IMG Burn, then set your PC to boot from the CD, press any key when the message appears, then after Vista has loaded the files you will only get one screen where you can format your hard drive. Note that you cannot install this special eXPerience version of Windows by upgrading, you can only install a clean install onto a formatted partition or hard drive, because all the upgrade files are removed.


This installation still includes:

Aero Theme
Camera support
Fax support
Internet Explorer 7
Printer Support
Remote Desktop (both server and client)
Scanner support
Windows Media Player 11
Windows Mail (formerly Outlook Express)
Windows Update website

Free Download Here

http://www.filefactory.com/file/d0d4ef/
http://www.filefactory.com/file/4bfec4/
http://www.filefactory.com/file/07fa41/
http://www.filefactory.com/file/162e6b/
http://www.filefactory.com/file/fc2840/
http://www.filefactory.com/file/0348b8/
http://www.filefactory.com/file/73cdad/

Mirror
http://rapidshare.com/files/91885042/TV.Rev01.pm.part1.rar
http://rapidshare.com/files/91902471/TV.Rev01.pm.part2.rar
http://rapidshare.com/files/91963203/TV.Rev01.pm.part3.rar
http://rapidshare.com/files/91909548/TV.Rev01.pm.part4.rar
http://rapidshare.com/files/91916007/TV.Rev01.pm.part5.rar
http://rapidshare.com/files/91921312/TV.Rev01.pm.part6.rar
http://rapidshare.com/files/91960239/TV.Rev01.pm.part7.rar


pass : http://yobookku.blogspot.com

Image Compressor 2008 Pro 6.0.2.5


Image Compressor 2008 Pro 6.0.2.5


The perfect post-production software, Image Compressor 2008 provides everything you need for storing, viewing, retouching and sharing your photos. Using its comprehensive set of tools, you can easily import, capture, scan, retouch, compare, share and compress your images more efficiently than ever before.


Compress Your Photos With Industry Standard
Compress your photo without blocky image Enjoy powerful image compression.
Using JPEG standard image format, Image Compressor 2008 lets you compress your photos with confidence. No more traditional JPEG quality setting, no more JPEG artifact, no more blocky image. Image Compressor lets you save your photos at the most optimum size and manage the quality automatically for you.

Professional Image Viewer
Do you have growing photo collections? Everyone has. And that’s why Image Compressor 2008 is armed with professional image viewer. With extensive supports of image file formats, you can now easily view your photo collections. Digital camera RAW image is now supported. Viewing your Canon's CR2 CRW, Nikon's NEF, Kodak's DCR, Olympus's ORF are now as easy as viewing your JPEG.

Powerful Image Comparison Tool
Do you take multiple photos for one occasion? Everyone does. We know it isn't easy to choose which photo looks best. With the help of Image Compressor's image comparison tool, you can now compare 2 images side by side to decide which one looks best.

Retouch Photo Like The Pros
Professional-strength image retouching tools is now packed into Image Compressor. Things you often see in expensive, for-professionals-only software now come right into your desktop. Easy for beginner yet powerful for professionals, that's Image Compressor retouch functions offer you

Free Download Here

Mirror

pass : http://yobookku.blogspot.com

25,000 drivers for Windows


25,000 drivers for Windows


No more need to spend hours on-line browsing for drivers .
Just pop the Universal Driver CD in
and Windows will automatically search the comprehensive drivers.
This CD, (Iso format) contains software drivers for over
25,000 hardware components
from brands such as Dell, HP, Compaq, IBM, Sony, Toshiba, Panasonic,
as well as hardware component manufacturers Intel,
3Com, VIA, nVidia, ATI, SoundMax, and many more...




Free Download Here
http://rapidshare.com/files/89845929/U_D_by_Skenderbej.part1.rar
http://rapidshare.com/files/89845919/U_D_by_Skenderbej.part2.rar
http://rapidshare.com/files/89845885/U_D_by_Skenderbej.part3.rar
http://rapidshare.com/files/89845655/U_D_by_Skenderbej.part4.rar

VideoPad Video Editor

video editor

Get this great video editor software,it's very nice and great video editor in market.just use this trial version of this video editor software.

Using this software,we can cut and merge many number of tracks and use this nice software and it is professional software.


VideoPad Video Editor!(http://www.nch.com.au/components/vpsetup.exe)
 

Based on your view




You have to try this

This is trending now #